iecee logo

Worldwide System for Conformity Testing and Certification of Electrotechnical Equipment and Components (IECEE)
 



NEW ACCEPTED IEC STANDARDS IN THE IECEE CB-SCHEME

Dividor


Just Published logo

No. 15 - 2009-07-27
 


GUIDELINES

The Member NCB(s) of the IECEE are the sole Organizations in conjunction with their associated CBTL(s), in the field of the IECEE operations, entitled to apply to operate the relevant IEC standard(s), edition(s) and amendment(s).

When National Differences exist against the relevant IEC standards, it is the responsibility of the Member NCB(s) to declare such status for each standard/edition(s)/amendment(s) and provide details of such National Differences by sending an email with the details to the IECEE Secretariat.

The Member Body is required to endorse the National Differences, Special National Conditions, Group Differences, by being copied in the email sent to the IECEE Secretariat. Regulatory Requirements shall be declared under the responsibility of the NCB.

IECEE Member NCB(s) are kindly requested to provide this information in electronic format (MSWord).

The Member NCB(s) “Scope Extension Request” can be declared/requested either by using the:

*Note: The Fast Track Extension request requires an application that shall be addressed to the IECEE Secretariat according to draft OD-CB2007 as applicable.

**Note: The Scope Extension request requires an application that shall be addressed to the IECEE Secretariat according to OD-CB2007 Part 5 or 7 as applicable.

For Member NCB(s) located in the same country where Regulatory Requirements, National Differences, Special National Conditions and Group Differences apply, it is the responsibility of the Member NCB(s) to coordinate, nationally, in order to provide the required information to the IECEE Secretariat once.

Of course the NCB must coordinate with their Member Body or the IEC National Committee to make sure that they are provided with the appropriate information.


Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 1 (2007-01-12)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 2 (2007-04-23)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 3 (2008-02-29)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 4 (2008-04-11)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 5 (2008-05-13)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 6 (2008-06-03)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 7 (2008-07-09)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 8 (2008-08-11)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 9 (2008-09-16)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.10(2008-10-17)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.11(2009-01-19)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.12(2009-03-04)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.13(2009-03-30)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.14(2009-05-25)



Dividor

IECEE CB-Scheme Standards Product Categories
Dividor
 

BATT - Batteries

No new IEC Standard(s)

separator

CABL - Cables and Cords

No new IEC Standard(s)

CAP - Capacitors as components

No new IEC Standard(s)

CONT - Switches for appliances and automatic controls for electrical household appliances

No new IEC Standard(s)

EMC - Electromagnetic Compatability


IEC 61000-3-5 (2009-07) Ed. 2.0

Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A

IEC 61000-5-9 (2009-07) Ed. 1.0
Electromagnetic compatibility (EMC) - Part 5-9: Installation and mitigation guidelines - System-level susceptibility assessments for HEMP and HPEM
Maintenance Result Date: 2012

CISPR 11 (2009-05) Ed. 5.0
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
Maintenance Result Date: 2010

CISPR 13 (2009-06) Ed. 5.0
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement
Maintenance Result Date: 2012

IEC 61547 (2009-06) Ed. 2.0
Equipment for general lighting purposes - EMC immunity requirements
Maintenance Result Date: 2014



HOUS - Household and similar equipment


No new IEC Standard(s)

INST - Installation accessories and connection devices

IEC 60684-3-211 (2007-02) Ed. 3.0
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
Maintenance Result Date: 2011

IEC 60684-3-246 (2007-02) Ed. 3.0
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, non-flame retarded
Maintenance Result Date: 2011

IEC 60684-3-248 (2007-02) Ed. 1.0
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1

IEC 61535 (2009-02) Ed. 1.0
Installation couplers intended for permanent connection in fixed installations
Maintenance Result Date: 2012

IEC 61386-1 (2008-02) Ed. 2.0
Conduit systems for cable management - Part 1: General requirements
Maintenance Result Date: 2011

IEC 61995-1 (2005-03) Ed. 1.0
Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements
Maintenance Result Date: 2007



LITE - Lighting

No new IEC Standard(s)

MEAS - Measurement, Control and Laboratory equipment

INo new IEC Standard(s)


MED - Electrical equipment for medical use

IEC 60601-2-54 (2009-06) Ed. 1.0
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
Maintenance Result Date: 2014

IEC 62467-1 (2009-06) Ed. 1.0
Medical electrical equipment - Dosimetric instruments as used in brachytherapy - Part 1: Instruments based on well-type ionization chambers
Maintenance Result Date: 2011

IEC 80601-2-30 (2009-01) Ed. 1.0
Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
Maintenance Result Date: 2011

MISC - Miscellaneous

IEC 61482-1-1 (2009-05) Ed. 1.0
Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-1: Test methods - Method 1: Determination of the arc rating (ATPV or EBT50) of flame resistant materials for clothing


OFF - IT and office equipment

No new IEC Standard(s)

POW - Low voltage, high power switching equipment

IEC 61439-1 (2009-01) Ed. 1.0
Low-voltage switchgear and controlgear assemblies - Part 1: General rules
Maintenance Result Date: 2012

IEC 61439-2 (2009-01) Ed. 1.0
Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies
Maintenance Result Date: 2012

 


PROT - Installation protective equipment

No new IEC Standard(s)


PV - Photovoltaics

IEC 60904-4 (2009-06) Ed. 1.0
Photovoltaic devices - Part 4: Reference solar devices - Procedures for establishing calibration traceability
Maintenance Result Date: 2011

IEC 60904-2 (2007-03) Ed. 2.0
Photovoltaic devices - Part 2: Requirements for reference solar devices
Maintenance Result Date: 2011

IEC 60904-9 (2007-10) Ed. 2.0
Photovoltaic devices - Part 9: Solar simulator performance requirements
Maintenance Result Date: 2011



SAFE - Saftey transformers and similar equipment

IEC 61558-2-16 (2009-06) Ed. 1.0
Safety of transformers, reactors, power supply units and similar products for voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units
Maintenance Result Date: 2013

separator

TOOL - Portable tools

No new IEC standard(s)

separator

TOYS - Electric Toys

No new IEC standard(s)

RoHs - Hazardous Substances

No new IEC Standard(s)

TRON - Electronics, entertainment

No new IEC standard(s)

NOTE:

If you have a received a request from the industry to certify for any additional IEC standard(s) that is not listed here, that you would like to add to the IECEE CB-Scheme, please send the IECEE Secretariat an email.


separator

WITHDRAWN/REPLACED PUBLICATIONS

Publication withdrawn TC Replaced by
There are no withdrawn/replaced publications    

Copyright © IECEE 2007. All Rights Reserved.

If you have any questions and/or comments, please contact The IECEE Secretariat.