Committee of Testing Laboratories

IEC 60065

IEC 60065(ed.5)

IEC 60065(ed.6)

-IEC 60065(ed.7)

Clause

Subject

Keywords

Sheet

Probe impedance for plug discharge test

- Probe impedance
- Plug discharge
- >= 100 MΩ
- 25 pF or less

PDSH 716

Clause

Subject

Keywords

Sheet

General

Standard for interactive terminals

standard applicable

547

Table III,     Note1

Parts likely to be touched

Parts likely to be touched

282

7.1, last paragraph

Power limiting protection

- Fuse-link
- Fusing resistor
- Thermal release

284

Clause

Subject

Keywords

Sheet

General

Standard for interactive terminals

standard applicable

547

General

Components and sub-assemblies incorporating lasers

Components
sub-assemblies
lasers

563

4.2.4

Determination of voltage at loudspeaker terminals

- Terminals
- Loudspeakers
- Non-clipped output power

438

4.3, 11

Transformer overload

- FAULT CONDITIONS

541.CTL-ETF2 

4.3.3

Semiconductor devices

- Semiconductor device
- Integrated circuit
- Hybrid circuit

288 

4.3.9

Fault conditions on audio amplifiers

- Audio amplifier
Fault condition

289

6

Laser Standard

- Normatives References, LASER

539.CTL-ETF2

6.2

Optical Output Connectors

- output connector
- laser
- LED

549

6.2

Laser Components

Laser

564

8.8

Test of non-separable thin sheet material

- Thin sheet material

393

9.3.4  and 14.1

Isolating resistors

- Single resistors
- Insulation

283 

9.1.1

Live loudspeaker terminals

- loudspeaker
- terminal

285

13.2

Applied force for internal parts

force for internal parts

525

14.6.1

Mains switch location

- Mains switch
- Speaker

286

16.1

Mains cords for double insulated apparatus

- Double insulated apparatus
- Double square symbol
- Earthing conductor

287 

17.3

Requirement for the screws fixing internal parts

- Screws
- Fixing internal parts

DSH 595

Clause

Subject

Keywords

Sheet

General

Components and sub-assemblies incorporating lasers

Components
sub-assemblies
lasers

563

Various

Humidity test requirements

- 93% RH
- +/-3% RH tolerance
- 20-30°C

DSH 624/07

--

Rule for creepage across grooves and similar surface discontinuities

- Creepage
- Grooves
- Conducting path
- Shortest distance
- Through air

590

2.6.3, 13 & 4.3.1

Short circuit of clearances and creepages in basic insulation when they are below the values of the corresponding tables.

Clearances & Creepage distances Basic insulation Short circuit of distances

DSH 620

2.8.4, 8.2 & 14.5.2.4

Access to live parts on fuse-holder

By HAND
Live parts
Fuse-holder

DSH 632

7.2

Softening temperature (Vicat) test to components

- Current carrying parts
- Softening temperature
- Heat resistance

DSH 621

7.1.1 Table 3

Permissible temperature rise, exposed vacuum tubes and enclosures of apparatus containing vacuum tubes

- accessible parts
- vacuum tube
- maximum temperature

DSH 566

10.2

Relative humidity

- Relative hummidity
- Range
- Percentage
- IECEE-CTL/193/INF

546

17.3

Requirement for the screws fixing internal parts

- Screws
- Fixing internal parts

DSH 595

Search Tool

Searching a sheet may be done using the Edit/find command in the browser:

• when you know the standard and the clause/subclause, by writing the number of the standard and than the clause/subclause;

• when you know a keyword relevant to the subject, by writing the keyword;

• when you know the number of the sheet, by writing it.

Then click on the number Sheet to see the Decision Sheet.